immagine principale articolo

The new Autonomous Mode: a simple and effective way to control CAEN RFID fixed readers

24th February 2022

Using a RAIN RFID fixed reader has never been as simple as today with the new Autonomous mode that was recently added to CAEN RFID fixed readers: the Quattro and the Proton.

The Autonomous mode permits to easily configure the reader with a user-friendly web interface to make the reader working without any further intervention.

Here are listed the main features exposed by the Autonomous mode:

HW AND SW TRIGGER MANAGEMENT:

reading operation can be started and stopped using the GPIO lines of the readers as well as using specific commands coming from a PLC or a controlling PC.
HW AND SW FLEXIBILITY ON OUTPUT DATA FORMAT:

data can be sent to the serial port, to a standard TCP/IP socket or via HTTP/HTTPS POST directly to an application server.

DUTY CYCLE CONFIGURATION
ANTENNA SELECTION:

the user can select which antennas to be used in the inventory process.
CONFIGURABLE AIR INTERFACE PARAMETERS

like output power, Q value, Sessions.
MULTIPLE OUTPUT INTERFACES:

data can be sent to the serial port, to a standard TCP/IP socket or via HTTP/HTTPS POST directly to an application server.
TAG FILTERING:

user can filter tags to be read by meaning of matching data (Select command) or by time (avoid reading continuously the same tag if not needed).
RSSI FILTERING:

tag with a low RSSI can be filtered out to simply exclude unwanted tags.
ALL TAG MEMORY BANKS CONTENT

can be read and returned in formatted output data.

The Autonomous mode is available on both the Quattro and the Proton readers.

Discover more about:

Sign up for our newsletter

    Name*
    Surname*
    E-mail*