void |
CAENRFIDReader._SetRFOnOff(short OnOff) |
Deprecated.
|
protected void |
CAENRFIDReader.AddNotifyTrigger(String Channel,
String Trigger) |
|
void |
CAENRFIDLogicalSource.AddReadPoint(String ReadPoint) |
Add a ReadPoint to the Source
|
protected void |
CAENRFIDReader.AddReadPoint(String Source,
String Antenna) |
|
protected void |
CAENRFIDReader.AddReadTrigger(String Source,
String Trigger) |
|
protected void |
CAENRFIDReader.AddSourceToChannel(String Channel,
String Source) |
|
byte[] |
CAENRFIDLogicalSource.Authenticate_EPC_C1G2(CAENRFIDTag Tag,
boolean SenRep,
boolean IncRepLen,
char Csi,
byte[] Challenge,
short RepLen,
int Password) |
The Authenticate_EPC_C1G2 method allows an interrogator to perform tag,
interrogator or mutual authentication.
|
protected byte[] |
CAENRFIDReader.Authenticate_EPC_C1G2(String Source,
CAENRFIDTag Tag,
boolean senRep,
boolean incRepLen,
char csi,
byte[] challenge,
short repLen,
int password) |
|
void |
CAENRFIDLogicalSource.BlockProgramID_EPC_C1G2(CAENRFIDTag Tag,
short NSI,
short BlockLength) |
This method can be used to optimize a programming operation on an
ISO18000-6C (EPC Class1 Gen2) tag's ID space, writing data a block of
bytes at time.
|
void |
CAENRFIDLogicalSource.BlockProgramID_EPC_C1G2(CAENRFIDTag Tag,
short NSI,
short BlockLength,
int AccessPassword) |
This method can be used to optimize a programming operation on an
ISO18000-6C (EPC Class1 Gen2) tag's ID space, writing data a block of
bytes at time.
|
protected void |
CAENRFIDReader.BlockProgramID_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short NSI,
short blockLength) |
|
protected void |
CAENRFIDReader.BlockProgramID_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short NSI,
short blockLength,
int accessPassword) |
|
void |
CAENRFIDLogicalSource.BlockWriteTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short BlockLength,
short Length,
byte[] Data) |
This method can be used to optimize a writing operation on an ISO18000-6C
(EPC Class1 Gen2) tag's memory, writing data a block of bytes at time.
|
void |
CAENRFIDLogicalSource.BlockWriteTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short BlockLength,
short Length,
byte[] Data,
int AccessPassword) |
This method can be used to optimize a writing operation on an ISO18000-6C
(EPC Class1 Gen2) tag's memory, writing data a block of bytes at time.
|
protected void |
CAENRFIDReader.BlockWriteTagData_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short MemBank,
short address,
short blockLength,
short nbyte,
byte[] twrite) |
|
protected void |
CAENRFIDReader.BlockWriteTagData_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short MemBank,
short address,
short blockLength,
short nbyte,
byte[] twrite,
int accessPassword) |
|
protected static CAENRFIDTag |
CAENRFIDNotify.buildFromNotify(CAENRFIDNotify notify,
CAENRFIDLogicalSource source) |
Deprecated.
|
protected short |
CAENRFIDReader.CheckChannelInTrigger(String Trigger,
String Channel) |
|
protected short |
CAENRFIDReader.CheckSourceInChannel(String Channel,
String Source) |
|
protected short |
CAENRFIDReader.CheckSourceInTrigger(String Trigger,
String Source) |
|
protected short |
CAENRFIDReader.CheckTriggerInChannel(String Channel,
String Trigger) |
|
void |
CAENRFIDLogicalSource.ClearBuffer() |
Clear the whole internal reader's buffer.
|
protected void |
CAENRFIDReader.ClearBuffer(String Source) |
|
void |
CAENRFIDReader.Connect(CAENRFIDPort ConType,
String Address) |
Start the communication with the CAEN RFID Reader.
|
protected byte[] |
CAENRFIDReader.CustomCMD_EPC_C1G2(String Source,
CAENRFIDTag Tag,
byte SubCmd,
short Length,
byte[] Data,
short TRLength) |
|
protected byte[] |
CAENRFIDReader.CustomCMD_EPC_C1G2(String Source,
CAENRFIDTag Tag,
byte SubCmd,
short Length,
byte[] Data,
short TRLength,
int SecurePassword) |
|
byte[] |
CAENRFIDLogicalSource.CustomCommand_EPC_C1G2(CAENRFIDTag Tag,
byte SubCmd,
short TXLen,
byte[] Data,
short RXLen) |
This method can be used to issue a generic Custom command as defined by
the EPC Class1 Gen2 protocol specification.
|
byte[] |
CAENRFIDLogicalSource.CustomCommand_EPC_C1G2(CAENRFIDTag Tag,
byte SubCmd,
short TXLen,
byte[] Data,
short RXLen,
int AccessPassword) |
This method can be used to issue a generic Custom command as defined by
the EPC Class1 Gen2 protocol specification.
|
void |
CAENRFIDReader.Disconnect() |
Close the connection with the CAEN RFID Reader releasing all the
allocated resources
|
void |
CAENRFIDReader.DoLogin(int Password) |
Grants administrator reader's permission to the user.
|
void |
CAENRFIDReader.DoLogout() |
Revokes all reader's administrator permissions to the user.
|
EM4325TagData |
CAENRFIDLogicalSource.EM4325_GetSensorData(CAENRFIDTag Tag,
boolean UIDEnable,
boolean NewSample) |
The GetSensorData command allows the reader to get the UID (if required)
and sensor's tag information with a single command.
|
protected EM4325TagData |
CAENRFIDReader.EM4325_GetSensorData(String Source,
CAENRFIDTag Tag,
boolean UIDEnable,
boolean NewSample) |
|
byte[] |
CAENRFIDLogicalSource.EM4325_GetUID(CAENRFIDTag Tag) |
The GetUID command allows the reader to get the UID from a tag with a
single command.
|
byte[] |
CAENRFIDLogicalSource.EM4325_GetUID(CAENRFIDTag Tag,
int Password) |
The GetUID command allows the reader to get the UID from a tag with a
single command.
|
protected byte[] |
CAENRFIDReader.EM4325_GetUID(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.EM4325_GetUID(String Source,
CAENRFIDTag Tag,
int password) |
|
void |
CAENRFIDLogicalSource.EM4325_ResetAlarms(CAENRFIDTag Tag,
int Password) |
The ResetAlarms command allows the reader to reset/clear the alarm
conditions for Aux, Under Temp and Over Temp.
|
protected void |
CAENRFIDReader.EM4325_ResetAlarms(String Source,
CAENRFIDTag Tag,
int SecurePassword) |
|
byte[] |
CAENRFIDLogicalSource.EM4325_SendSPI(CAENRFIDTag Tag,
byte SPIConfig,
byte[] SPICmd,
int SlaveSPILength) |
The SendSPI command allows the reader to use the EM4325 SPI interface to
send an SPI command to an SPI slave device attached to the EM4325 chip.
|
byte[] |
CAENRFIDLogicalSource.EM4325_SendSPI(CAENRFIDTag Tag,
byte SPIConfig,
byte[] SPICmd,
int SlaveSPILength,
int Password) |
The SendSPI command allows the reader to use the EM4325 SPI interface to
send an SPI command to an SPI slave device attached to the EM4325 chip.
|
protected byte[] |
CAENRFIDReader.EM4325_SendSPI(String Source,
CAENRFIDTag Tag,
byte SPIConfig,
byte[] SPICmd,
int SlaveSPILength) |
|
protected byte[] |
CAENRFIDReader.EM4325_SendSPI(String Source,
CAENRFIDTag Tag,
byte SPIConfig,
byte[] SPICmd,
int SlaveSPILength,
int SecurePassword) |
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(byte[] Mask,
short MaskLength,
short Position,
long Flag) |
A call to this method will start a sequence of read cycle on each read
point linked to the logical source.
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(byte[] Mask,
short MaskLength,
short Position,
long Flag,
InventorySubCommand subCommand) |
A call to this method will start a sequence of read cycle on each read
point linked to the logical source.
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(byte[] Mask,
short MaskLength,
short Position,
short Flag) |
Deprecated.
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(byte[] Mask,
short MaskLength,
short Position,
short Flag,
InventorySubCommand subCommand) |
Deprecated.
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
long Flag,
InventorySubCommand subCommand) |
A call to this method will start a sequence of read cycle on each read
point linked to the logical source.
|
boolean |
CAENRFIDLogicalSource.EventInventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
short Flag,
InventorySubCommand subCommand) |
Deprecated.
|
protected boolean |
CAENRFIDReader.EventInventoryTag(String Source,
short Bank,
byte[] Mask,
short MaskLength,
short position,
long flag,
InventorySubCommand inventorySubCommand) |
|
boolean |
CAENRFIDReader.ForceAbort(long timeout) |
This method tries to stop a pending continuos inventory (see
EventInventoryTag method) that has not been stopped correclty by an
InventoryAbort or Disconnect call.
|
void |
CAENRFIDReader.FWUpgradeTFTP(String server,
String filename) |
Deprecated.
|
int |
CAENRFIDReader.GetBatteryLevel() |
Returns the reader's battery charge level.
|
CAENRFIDBitRate |
CAENRFIDReader.GetBitRate() |
Get the current setting of RF BitRate.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.GetBufferedData() |
The function returns all the Tags stored in reader's memory using all the
ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.GetBufferedData(int address,
int length) |
The function returns all the Tags stored in reader's memory using all the
ReadPoints belonging to the Source.
|
protected CAENRFIDTag[] |
CAENRFIDReader.GetBufferedData(String Source) |
|
protected CAENRFIDTag[] |
CAENRFIDReader.GetBufferedData(String Source,
int address,
int length) |
|
int |
CAENRFIDLogicalSource.GetBufferSize() |
Get the internal buffer size.
|
protected int |
CAENRFIDReader.GetBufferSize(String Source) |
|
protected short |
CAENRFIDReader.GetChannelStatus(String Channel) |
|
Set<CAENRFIDReaderEventMode> |
CAENRFIDReader.GetEventMode() |
Get the current Event Generation Mode of the Reader
|
short |
CAENRFIDReader.GetFHSS() |
Gets the current FHSS mode setting.
|
String |
CAENRFIDReader.GetFirmwareRelease() |
Permits to read the firmware release loaded into the device.
|
String |
CAENRFIDReader.GetFirmwareRelease(short level) |
Permits to read the firmware release loaded into the device, or one of
it's internal module.
|
int |
CAENRFIDLogicalSource.GetInventoryCounts() |
Gets the current number of inventory round performed by the logical
source during the inventory algorithm execution.
|
int |
CAENRFIDLogicalSource.GetInventoryDwellTime() |
Gets the inventory execution time (msec) used by the logical source
during the inventory algorithm execution.
|
int |
CAENRFIDLogicalSource.GetInventoryQuietTime() |
Gets the inventory quiet time (msec) used by the logical source during
the inventory algorithm execution.
|
int |
CAENRFIDReader.GetIO() |
Get the current digital Input and Output lines value.
|
int |
CAENRFIDReader.GetIODirection() |
Get the current digital Input and Output direction lines value.
|
short |
CAENRFIDReader.GetLBTMode() |
Deprecated.
|
int |
CAENRFIDLogicalSource.GetMaxQ_EPC_C1G2() |
Get the current maximum Q Value for the C1G2 Protocol of the Source
|
int |
CAENRFIDLogicalSource.GetMinQ_EPC_C1G2() |
Get the current minimum Q Value for the C1G2 Protocol of the Source
|
CAENRFIDNetworkInfo |
CAENRFIDReader.GetNetwork() |
Gets the IP v4 network settings of the reader (if supported).
|
int |
CAENRFIDLogicalSource.GetNumMinQ_EPC_C1G2() |
Get the number of inventory round count to perform with minimum EPC Class
1 Gen. 2 Q value and no tags found on each readpoint of this logical
source, before stop the inventory execution.
|
int |
CAENRFIDReader.GetPower() |
Get the current setting of RF power.
|
CAENRFIDProtocol |
CAENRFIDReader.GetProtocol() |
Get the current air protocol of the Reader
|
int |
CAENRFIDLogicalSource.GetQ_EPC_C1G2() |
This method can be used to retrieve the current setting for the initial Q
value (see EPC Class1 Gen2 protocol specification) used by the
anticollision algorithm when called on this logical source.
|
int |
CAENRFIDLogicalSource.GetReadCycle() |
This method gets the current number of read cycles performed by the
logical source for the inventoryTag command execution.
|
CAENRFIDReaderInfo |
CAENRFIDReader.GetReaderInfo() |
Permits to read the ReaderInfo loaded into the device.
|
CAENRFIDReaderInfo |
CAENRFIDReader.GetReaderInfo(short level) |
Permits to read the model and the serial number of the reader, or one of
it's internal module.
|
String |
CAENRFIDTag.GetReadPoint() |
Get the ReadPoint that has detected the tag
|
protected short |
CAENRFIDReader.GetReadPointInSource(String Source,
String Antenna) |
|
int |
CAENRFIDReader.GetReadPointPower(String readPoint) |
Get the conducted power in mW set on antenna identified by readPoint.
|
CAENRFIDReadPointStatus |
CAENRFIDReader.GetReadPointStatus(String ReadPoint) |
Get the CAENRFIDReadPointStatus object rapresenting the status of a
ReadPoint.
|
short |
CAENRFIDReader.GetRFChannel() |
Gets the RF Channel
|
CAENRFIDRFRegulations |
CAENRFIDReader.GetRFRegulation() |
Gets RF regulation value
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetSelectAction_EPC_C1G2() |
Get the current Select Action value for the C1G2 Protocol of the Source
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetSelected_EPC_C1G2() |
Get the current Selected value for the C1G2 Protocol of the Source
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetSelectTargetSession_EPC_C1G2() |
Get the current Select Target Session value for the C1G2 Protocol of the
Source
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetSelectTruncate_EPC_C1G2() |
Get the current Select Truncate value for the C1G2 Protocol of the Source
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetSession_EPC_C1G2() |
This method can be used to retrieve the Session setting (see EPC Class1
Gen2 protocol specification) used by the anticollision algorithm when
called on this logical source.
|
CAENRFIDLogicalSource |
CAENRFIDReader.GetSource(String Source) |
Get a Source object
|
protected int |
CAENRFIDReader.GetSourceConfiguration(String Source,
int ParType) |
|
CAENRFIDLogicalSourceConstants |
CAENRFIDLogicalSource.GetTarget_EPC_C1G2() |
Get the current Target value for the C1G2 Protocol of the Source
|
int |
CAENRFIDLogicalSource.GetTIDLength() |
This method can be use to get the excepted TID length when TID reading is
enabled as flag in inventory methods.
|
protected void |
CAENRFIDReader.IDS_SL900A_EndLog(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.IDS_SL900A_GetBatteryLevel(String Source,
CAENRFIDTag Tag,
boolean BatteryTypeReCheck) |
|
protected byte[] |
CAENRFIDReader.IDS_SL900A_GetCalibrationData(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.IDS_SL900A_GetLogState(String Source,
CAENRFIDTag Tag,
boolean ShelfLife) |
|
protected byte[] |
CAENRFIDReader.IDS_SL900A_GetMeasurementSetup(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.IDS_SL900A_GetSensorValue(String Source,
CAENRFIDTag Tag,
byte SensorType) |
|
protected void |
CAENRFIDReader.IDS_SL900A_Initialize(String Source,
CAENRFIDTag Tag,
short DelayTime,
short ApplicationData) |
|
protected void |
CAENRFIDReader.IDS_SL900A_OpenArea(String Source,
CAENRFIDTag Tag,
byte PasswordLevel,
int Password) |
|
protected void |
CAENRFIDReader.IDS_SL900A_SetLog(String Source,
CAENRFIDTag Tag,
int LogMode) |
|
protected void |
CAENRFIDReader.IDS_SL900A_SetLogLimits(String Source,
CAENRFIDTag Tag,
byte[] LogLimits) |
|
protected void |
CAENRFIDReader.IDS_SL900A_SetPassword(String Source,
CAENRFIDTag Tag,
byte PasswordLevel,
int Password) |
|
protected void |
CAENRFIDReader.IDS_SL900A_StartLog(String Source,
CAENRFIDTag Tag,
int StartTime) |
|
void |
CAENRFIDReader.InventoryAbort() |
Stops the InventoryTag when executed in Continuous Mode.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag() |
The function returns all the Tags under the reader field using all the
ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position,
long Flag) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position,
long Flag,
InventorySubCommand subCommand) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position,
short Flag) |
Deprecated.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position,
short Flag,
InventorySubCommand subCommand) |
Deprecated.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(byte[] Mask,
short MaskLength,
short Position,
InventorySubCommand subCommand) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
long Flag) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
long Flag,
InventorySubCommand subCommand) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
short Flag) |
Deprecated.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
short Flag,
InventorySubCommand subCommand) |
Deprecated.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(short Bank,
byte[] Mask,
short MaskLength,
short Position,
InventorySubCommand subCommand) |
The function returns all the Tags under the reader field that match to a
specified mask, using all the ReadPoints belonging to the Source.
|
CAENRFIDTag[] |
CAENRFIDLogicalSource.InventoryTag(InventorySubCommand subCommand) |
The function returns all the Tags under the reader field using all the
ReadPoints belonging to the Source.
|
protected CAENRFIDTag[] |
CAENRFIDReader.InventoryTag(String Source,
short bank,
byte[] Mask,
short MaskLength,
short Position,
long flag,
InventorySubCommand inventorySubCommand) |
|
void |
CAENRFIDLogicalSource.ISO180006C_BroadcastSync(byte[] UTC) |
BroadcastSync is an optional ISO18000-6C command which allows readers to
provide the current time to sensor tags.
|
protected void |
CAENRFIDReader.ISO180006C_BroadcastSync(byte[] UTC) |
|
boolean |
CAENRFIDLogicalSource.IsReadPointPresent(String ReadPoint) |
Check if a ReadPoint is present in the Source
|
void |
CAENRFIDLogicalSource.KillTag_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int Password) |
Kill the EPC_C1G2 Tag.
|
void |
CAENRFIDLogicalSource.KillTag_EPC_C1G2(CAENRFIDTag Tag,
int Password) |
Kill the EPC_C1G2 Tag.
|
protected void |
CAENRFIDReader.KillTag_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int AccessPassword) |
|
protected void |
CAENRFIDReader.KillTag_EPC_C1G2(String Source,
CAENRFIDTag tag,
int password) |
|
void |
CAENRFIDLogicalSource.LockBlockPermalock_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short BlockPtr,
short BlockRange,
byte[] Mask,
int AccessPassword) |
This method implements the BlockPermalock with ReadLock=1 as specified in
EPC C1G2 rev. 1.2.0 protocol.
|
protected void |
CAENRFIDReader.LockBlockPermalock_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short MemBank,
short BlockPtr,
short BlockRange,
byte[] Mask,
int AccessPassword) |
|
void |
CAENRFIDLogicalSource.LockTag_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int Payload) |
Lock a EPC C1G2 Tag's memory in Secure Mode.
|
void |
CAENRFIDLogicalSource.LockTag_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int Payload,
int AccessPassword) |
Lock a EPC C1G2 Tag's memory in Secure Mode.
|
void |
CAENRFIDLogicalSource.LockTag_EPC_C1G2(CAENRFIDTag Tag,
int Payload) |
Lock a EPC C1G2 Tag's memory.
|
void |
CAENRFIDLogicalSource.LockTag_EPC_C1G2(CAENRFIDTag Tag,
int Payload,
int AccessPassword) |
Lock a EPC C1G2 Tag's memory in Secure Mode.
|
protected void |
CAENRFIDReader.LockTag_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int Payload) |
|
protected void |
CAENRFIDReader.LockTag_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
int Payload,
int AccessPassword) |
|
protected void |
CAENRFIDReader.LockTag_EPC_C1G2(String Source,
CAENRFIDTag tag,
int payload) |
|
protected void |
CAENRFIDReader.LockTag_EPC_C1G2(String Source,
CAENRFIDTag tag,
int payload,
int SecurePassword) |
|
byte[] |
CAENRFIDLogicalSource.MAGNUSS2_ReadSensor(CAENRFIDTag Tag) |
The MAGNUSS2_ReadSensor method reads the tag sensor.
|
byte[] |
CAENRFIDLogicalSource.MAGNUSS3_ReadSensor(CAENRFIDTag Tag) |
The MAGNUSS3_ReadSensor method reads the tag sensor.
|
byte[] |
CAENRFIDLogicalSource.MAGNUSS3_ReadTemperature(CAENRFIDTag Tag) |
The MAGNUSS3_ReadTemperature method reads the tag temperature sensor.
|
float |
CAENRFIDReader.MatchReadPointImpedance(String ReadPoint) |
MatchReadPointImpedance matches the antenna impedance passed in
ReadPoint.
|
float |
CAENRFIDReader.MatchReadPointImpedance(String ReadPoint,
CAENRFIDMatchingParams MatchParam,
short MatchParamValue) |
MatchReadPointImpedance matches the antenna impedance passed in
ReadPoint.
|
void |
CAENRFIDLogicalSource.NXP_Calibrate(CAENRFIDTag Tag) |
Deprecated.
|
void |
CAENRFIDLogicalSource.NXP_Calibrate(CAENRFIDTag Tag,
int AccessPassword) |
Sends the NXP Calibrate custom command
|
protected void |
CAENRFIDReader.NXP_Calibrate(String Source,
CAENRFIDTag Tag) |
|
protected void |
CAENRFIDReader.NXP_Calibrate(String Source,
CAENRFIDTag Tag,
int SecurePassword) |
|
void |
CAENRFIDLogicalSource.NXP_ChangeConfig(CAENRFIDTag Tag,
short ConfigWord) |
This method can be used to issue a NXP_ChangeConfig custom command as
defined in the NXP UCODE G2iM and G2iM+ datasheet.
|
void |
CAENRFIDLogicalSource.NXP_ChangeConfig(CAENRFIDTag Tag,
short ConfigWord,
int Password) |
This method can be used to issue a NXP_ChangeConfig custom command as
defined in the NXP UCODE G2iM and G2iM+ datasheet.
|
protected void |
CAENRFIDReader.NXP_ChangeConfig(String Source,
CAENRFIDTag Tag,
short ConfigWord) |
|
protected void |
CAENRFIDReader.NXP_ChangeConfig(String Source,
CAENRFIDTag Tag,
short ConfigWord,
int SecurePassword) |
|
void |
CAENRFIDLogicalSource.NXP_ChangeEAS(CAENRFIDTag Tag,
boolean EAS) |
Deprecated.
|
void |
CAENRFIDLogicalSource.NXP_ChangeEAS(CAENRFIDTag Tag,
boolean EAS,
int AccessPassword) |
Sends the NXP Change EAS custom command
|
protected void |
CAENRFIDReader.NXP_ChangeEAS(String Source,
CAENRFIDTag Tag,
boolean EAS) |
|
protected void |
CAENRFIDReader.NXP_ChangeEAS(String Source,
CAENRFIDTag Tag,
boolean EAS,
int SecurePassword) |
|
byte[] |
CAENRFIDLogicalSource.NXP_EAS_Alarm() |
Sends the NXP EAS Alarm custom command
|
byte[] |
CAENRFIDLogicalSource.NXP_EAS_Alarm(CAENRFIDTag Tag,
int AccessPassword) |
Deprecated.
|
protected byte[] |
CAENRFIDReader.NXP_EAS_Alarm(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.NXP_EAS_Alarm(String Source,
CAENRFIDTag Tag,
int SecurePassword) |
|
protected void |
CAENRFIDReader.NXP_EnableBrandIdentifier(String Source,
boolean Enable) |
|
CAENRFIDTag_NXP_UCODE8[] |
CAENRFIDLogicalSource.NXP_InventoryWithBrandIdentifier() |
This method is used to run an inventory with the NXP UCODE 8/8m Brand
Identifier returning option.
|
protected CAENRFIDTag_NXP_UCODE8[] |
CAENRFIDReader.NXP_InventoryWithBrandIdentifier(String Source) |
|
void |
CAENRFIDLogicalSource.NXP_ReadProtect(CAENRFIDTag Tag) |
Sends the NXP Calibrate custom command
|
void |
CAENRFIDLogicalSource.NXP_ReadProtect(CAENRFIDTag Tag,
int AccessPassword) |
Sends the NXP ReadProtect custom command
|
protected void |
CAENRFIDReader.NXP_ReadProtect(String Source,
CAENRFIDTag Tag) |
|
protected void |
CAENRFIDReader.NXP_ReadProtect(String Source,
CAENRFIDTag Tag,
int SecurePassword) |
|
void |
CAENRFIDLogicalSource.NXP_ResetReadProtect(CAENRFIDTag Tag,
int Password) |
Sends the NXP ResetReadProtect custom command
|
void |
CAENRFIDLogicalSource.NXP_ResetReadProtect(CAENRFIDTag Tag,
int Password,
int AccessPassword) |
Deprecated.
|
protected void |
CAENRFIDReader.NXP_ResetReadProtect(String Source,
CAENRFIDTag Tag,
int Password) |
|
protected void |
CAENRFIDReader.NXP_ResetReadProtect(String Source,
CAENRFIDTag Tag,
int Password,
int SecurePassword) |
|
protected short |
CAENRFIDReader.Oridao_Begin(String Source,
CAENRFIDTag Tag) |
|
protected short |
CAENRFIDReader.Oridao_Begin(String Source,
CAENRFIDTag Tag,
int SecurePassword) |
|
short |
CAENRFIDLogicalSource.ORIDAO_Begin(CAENRFIDTag Tag) |
The ORIDAOBegin command is used to put the tag in the open or secure
mode: if the password's value is 0 or the given password does not match
the access password stored in the reserved memory bank then the tag will
be put in the open state, otherwise the secure mode will be entered.
|
short |
CAENRFIDLogicalSource.ORIDAO_Begin(CAENRFIDTag Tag,
int Password) |
The ORIDAOBegin command is used to put the tag in the open or secure
mode: if the password's value is 0 or the given password does not match
the access password stored in the reserved memory bank then the tag will
be put in the open state, otherwise the secure mode will be entered.
|
protected byte[] |
CAENRFIDReader.Oridao_Command(String Source,
CAENRFIDTag Tag,
short handle,
short WriteLengthBit,
byte[] WriteData,
short ReplyLengthBit) |
|
byte[] |
CAENRFIDLogicalSource.ORIDAO_Command(CAENRFIDTag Tag,
short handle,
short WriteLengthBit,
byte[] WriteData,
short ReplyLengthBit) |
The ORIDACommand is used to send the ORIDAO custom command to a tag put
in the open or secure mode by a previous ORIDAO begin command.
|
protected void |
CAENRFIDReader.Oridao_End(String Source,
CAENRFIDTag Tag) |
|
void |
CAENRFIDLogicalSource.ORIDAO_End(CAENRFIDTag Tag) |
The ORIDAOEnd command turn off the RF power which was left on by a
previous ORIDAOBegin command.
|
void |
CAENRFIDReader.PrintScreen(String Text,
int TerminalType) |
Print ASCII text on the reader's screen (if available).
|
void |
CAENRFIDLogicalSource.ProgramID_EPC_C1G2(CAENRFIDTag Tag,
short NSI) |
Write the ID into the EPC_C1G2 Tag
|
void |
CAENRFIDLogicalSource.ProgramID_EPC_C1G2(CAENRFIDTag Tag,
short NSI,
int AccessPassword) |
Write the ID into the EPC_C1G2 Tag in Secure Mode
|
protected void |
CAENRFIDReader.ProgramID_EPC_C1G2(String Source,
CAENRFIDTag tag,
short nsi) |
|
protected void |
CAENRFIDReader.ProgramID_EPC_C1G2(String Source,
CAENRFIDTag tag,
short nsi,
int SecurePassword) |
|
boolean |
CAENRFIDLogicalSource.Query_EPC_C1G2() |
Query for detect a EPC C1G2 Tag.
|
protected boolean |
CAENRFIDReader.Query_EPC_C1G2(String Source) |
|
byte[] |
CAENRFIDLogicalSource.QueryAck_EPC_C1G2() |
Query for detect the single Tag under the RF field.
|
protected byte[] |
CAENRFIDReader.QueryAck_EPC_C1G2(String Source) |
|
byte[] |
CAENRFIDLogicalSource.ReadBlockPermalock_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short BlockPtr,
short BlockRange,
int AccessPassword) |
This method implements the BlockPermalock with ReadLock=0 as specified in
EPC C1G2 rev. 1.2.0 protocol.
|
protected byte[] |
CAENRFIDReader.ReadBlockPermalock_EPC_C1G2(String Source,
CAENRFIDTag Tag,
short MemBank,
short BlockPtr,
short BlockRange,
int AccessPassword) |
|
byte[] |
CAENRFIDLogicalSource.ReadTagData_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length) |
Read EPC C1G2 Tag's memory
|
byte[] |
CAENRFIDLogicalSource.ReadTagData_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
int AccessPassword) |
Read EPC C1G2 Tag's memory
|
byte[] |
CAENRFIDLogicalSource.ReadTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short Length) |
Read EPC C1G2 Tag's memory
|
byte[] |
CAENRFIDLogicalSource.ReadTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short Length,
int AccessPassword) |
Read EPC C1G2 Tag's memory in Secure Mode
|
protected byte[] |
CAENRFIDReader.ReadTagData_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length) |
|
protected byte[] |
CAENRFIDReader.ReadTagData_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
int AccessPassword) |
|
protected byte[] |
CAENRFIDReader.ReadTagData_EPC_C1G2(String Source,
CAENRFIDTag tag,
short membank,
short address,
short nbyte) |
|
protected byte[] |
CAENRFIDReader.ReadTagData_EPC_C1G2(String Source,
CAENRFIDTag tag,
short membank,
short address,
short nbyte,
int SecurePassword) |
|
protected void |
CAENRFIDReader.RemoveNotifyTrigger(String Channel,
String Trigger) |
|
void |
CAENRFIDLogicalSource.RemoveReadPoint(String ReadPoint) |
Remove the a ReadPoint from the Source
|
protected void |
CAENRFIDReader.RemoveReadPoint(String Source,
String Antenna) |
|
protected void |
CAENRFIDReader.RemoveReadTrigger(String Source,
String Trigger) |
|
protected void |
CAENRFIDReader.RemoveSourceFromChannel(String Channel,
String Source) |
|
protected void |
CAENRFIDReader.ResetSession(String Source) |
|
void |
CAENRFIDLogicalSource.ResetSession_EPC_C1G2() |
This method can be used to reset the Session status for EPC Class1 Gen2
tags.
|
protected byte[] |
CAENRFIDReader.RFMicron_MAGNUSS2_ReadSensor(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.RFMicron_MAGNUSS3_ReadSensor(String Source,
CAENRFIDTag Tag) |
|
protected byte[] |
CAENRFIDReader.RFMicron_MAGNUSS3_ReadTemperature(String Source,
CAENRFIDTag Tag) |
|
void |
CAENRFIDReader.SetAdminPassword(int Password) |
Set the admin password of the Reader.
|
void |
CAENRFIDReader.SetBitRate(CAENRFIDBitRate BitRate) |
Set the RF BitRate to use.
|
void |
CAENRFIDReader.SetDateTime(String DateTime) |
Set the Date/Time of the Reader
|
void |
CAENRFIDReader.SetEventMode(Set<CAENRFIDReaderEventMode> mode) |
Set the Event Generation Mode of the Reader
|
void |
CAENRFIDReader.SetFHSS(short enable) |
Enable the FHSS (Frequency hopping) for the regulation (if supported).
|
void |
CAENRFIDLogicalSource.SetInventoryCounts(int Value) |
Sets the current number of inventory round performed by the logical
source during the inventory algorithm execution.
|
void |
CAENRFIDLogicalSource.SetInventoryDwellTime(int Value) |
Sets the inventory execution time (msec) used by the logical source
during the inventory algorithm execution.
|
void |
CAENRFIDLogicalSource.SetInventoryQuietTime(int Value) |
Sets the inventory quiet time (msec) used by the logical source during
the inventory algorithm execution.
|
void |
CAENRFIDReader.SetIO(int IOValue) |
Set the Output lines value
|
void |
CAENRFIDReader.SetIODIRECTION(int IODirection) |
Set the Output lines direction
|
void |
CAENRFIDReader.SetLBTMode(short LBTMode) |
Deprecated.
|
void |
CAENRFIDLogicalSource.SetMaxQ_EPC_C1G2(int Value) |
Set the maximum Q value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetMinQ_EPC_C1G2(int Value) |
Set the minimum Q value for the C1G2 Protocol of the Source
|
void |
CAENRFIDReader.SetNetwork(String IPAddress,
String NetMask,
String Gateway) |
Set the TCP/IP configuration of the Reader.
|
void |
CAENRFIDLogicalSource.SetNumMinQ_EPC_C1G2(int Value) |
Set the number of inventory round count to perform with minimum EPC Class
1 Gen. 2 Q value and no tags found on each readpoint of this logical
source, before stop the inventory execution.
|
void |
CAENRFIDReader.SetPower(int power) |
Set the RF power of the Reader.
|
void |
CAENRFIDReader.SetProtocol(CAENRFIDProtocol Protocol) |
Set the air protocol of the Reader
|
void |
CAENRFIDLogicalSource.SetQ_EPC_C1G2(int Value) |
Set the Q value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetReadCycle(int Value) |
This method sets the current number of read cycles performed by the
logical source for the inventoryTag command execution.
|
void |
CAENRFIDReader.SetReadPointPower(String readPoint,
int power) |
Sets the conducted RF power for the provided readPoint
|
void |
CAENRFIDReader.SetRFChannel(short Channel) |
Sets the RF Channel
|
void |
CAENRFIDReader.SetRFRegulation(CAENRFIDRFRegulations RFRegulation) |
Sets the RF regulation value
|
void |
CAENRFIDReader.SetRS232(int baud,
int datab,
int stopb,
CAENRFIDRS232Constants parity,
CAENRFIDRS232Constants flowc) |
Set the RS232 port's parameters of the Reader.
|
void |
CAENRFIDReader.SetRS232WithPersistence(int baud,
int datab,
int stopb,
CAENRFIDRS232Constants parity,
CAENRFIDRS232Constants flowc,
boolean persistence) |
Set the RS232 port's parameters of the Reader, indicating if the settings
to apply should be persistent or not.
|
void |
CAENRFIDLogicalSource.SetSelectAction_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Select Action value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetSelected_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Selected value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetSelectTargetSession_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Select Target Session value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetSelectTruncate_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Select Truncate value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetSession_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Section value for the C1G2 Protocol of the Source
|
protected void |
CAENRFIDReader.SetSourceConfiguration(String Source,
int ParType,
int ParValue) |
|
void |
CAENRFIDLogicalSource.SetTarget_EPC_C1G2(CAENRFIDLogicalSourceConstants Value) |
Set the Target value for the C1G2 Protocol of the Source
|
void |
CAENRFIDLogicalSource.SetTIDLength(int Value) |
This method can be use to set the excepted TID length when TID reading is
enabled as flag in inventory methods.
|
void |
CAENRFIDLogicalSource.SL900A_EndLog(CAENRFIDTag Tag) |
This method can be used to issue an IDS SL900A EndLog custom command as
defined in the IDS SL900A datasheet.
|
byte[] |
CAENRFIDLogicalSource.SL900A_GetBatteryLevel(CAENRFIDTag Tag,
Boolean BatteryTypeReCheck) |
The SL900A_GetBatteryLevel method try to read the level of the battery
The current status is returned as: | AD | BT | ZE | BL | AD : A\D error
(1 bit) BT : Battery Type (1 bit) ZE : Zeros (4 bits) BL : Battery Level
(10 bits)
|
byte[] |
CAENRFIDLogicalSource.SL900A_GetCalibrationData(CAENRFIDTag Tag) |
The SL900A_GetCalibrationData method try to read the calibration data for
the internal and external sensors.
|
byte[] |
CAENRFIDLogicalSource.SL900A_GetLogState(CAENRFIDTag Tag,
boolean ShelfLife) |
This method can be used to issue an IDS SL900A Get Log State custom
command as defined in the IDS SL900A datasheet.
|
byte[] |
CAENRFIDLogicalSource.SL900A_GetMeasurementSetup(CAENRFIDTag Tag) |
The SL900A_GetMeasurementSetup method try to read the current system
setup.
|
IDSTagData |
CAENRFIDLogicalSource.SL900A_GetSensorValue(CAENRFIDTag Tag,
byte SensorType) |
This method can be used to issue an IDS SL900A Get Sensor Value custom
command as defined in the IDS SL900A datasheet.
|
void |
CAENRFIDLogicalSource.SL900A_Initialize(CAENRFIDTag Tag,
short DelayTime,
short ApplicationData) |
This method can be used to issue an IDS SL900A Initialize custom command
as defined in the IDS SL900A datasheet.
|
void |
CAENRFIDLogicalSource.SL900A_OpenArea(CAENRFIDTag Tag,
byte PasswordLevel,
int Password) |
The SL900A_OpenArea method opens the specified area of the memory.
|
void |
CAENRFIDLogicalSource.SL900A_SetLogLimits(CAENRFIDTag Tag,
byte[] LogLimits) |
This SL900A_SetLogLimits method issues 4 limits that are going to be used
for logging measurement data.
|
void |
CAENRFIDLogicalSource.SL900A_SetLogMode(CAENRFIDTag Tag,
int LogMode) |
The SET LOG MODE command sets the logging form, storage rule, enables
sensors that are used in the logging process and finally sets the logging
interval (in 1 second steps).
|
void |
CAENRFIDLogicalSource.SL900A_SetPassword(CAENRFIDTag Tag,
byte PasswordLevel,
int Password) |
The SL900A_SetPassword method sets the password for the specified memory
area.
|
void |
CAENRFIDLogicalSource.SL900A_StartLog(CAENRFIDTag Tag,
int StartTime) |
The START LOG command starts the logging procedure and sets the Start
time in UTC format.
|
void |
CAENRFIDLogicalSource.Untraceable_EPC_C1G2(CAENRFIDTag Tag,
boolean U,
boolean HideEPC,
byte HideTID,
boolean HideUser,
short Range,
short NewEPCLen,
int Password) |
The Untraceable_EPC_C1G2 command allows an interrogator with an asserted
Untraceable privilege to instruct a Tag to (a) alter the L and U bits in
EPC memory,(b) hide memory from interrogators with a deasserted
Untraceable privilege and/or (c) reduce its operating range for all
interrogators.
|
protected void |
CAENRFIDReader.Untraceable_EPC_C1G2(String Source,
CAENRFIDTag Tag,
boolean u,
boolean hideEPC,
byte hideTID,
boolean hideUser,
short range,
short newEPCLen,
int password) |
|
void |
CAENRFIDLogicalSource.WriteTagData_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
byte[] Data) |
Write EPC C1G2 Tag's memory
|
void |
CAENRFIDLogicalSource.WriteTagData_EPC_C1G2(short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
byte[] Data,
int AccessPassword) |
Write EPC C1G2 Tag's memory
|
void |
CAENRFIDLogicalSource.WriteTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short Length,
byte[] Data) |
Write into the EPC C1G2 Tag's memory
|
void |
CAENRFIDLogicalSource.WriteTagData_EPC_C1G2(CAENRFIDTag Tag,
short MemBank,
short Address,
short Length,
byte[] Data,
int AccessPassword) |
Write into the EPC C1G2 Tag's memory in Secure Mode
|
protected void |
CAENRFIDReader.WriteTagData_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
byte[] Data) |
|
protected void |
CAENRFIDReader.WriteTagData_EPC_C1G2(String Source,
short BankMask,
short PositionMask,
short LengthMask,
byte[] Mask,
short MemBank,
short Address,
short Length,
byte[] Data,
int AccessPassword) |
|
protected void |
CAENRFIDReader.WriteTagData_EPC_C1G2(String Source,
CAENRFIDTag tag,
short membank,
short address,
short nbyte,
byte[] twrite) |
|
protected void |
CAENRFIDReader.WriteTagData_EPC_C1G2(String Source,
CAENRFIDTag tag,
short membank,
short address,
short nbyte,
byte[] twrite,
int SecurePassword) |
|